HY-M621/M521 Heavy duty 4-side Moulder for floor, door and frame processing

1.Heavy-duty cutting gear case

2.The feeding roller transmits through cardan joints and gear case, which guarantees strong power. Smooth feeding, powerful transmission and precise feeding

3.Every cutter shaft is assembled and tested under air-conditioned environment and is supported by SKF bearing. The stable-worked shaft guarantees the surface roughness of finished products

4.Quick liftable short material device

5.This mechanism enable the smooth feeding for short woods. The auxiliary feeding roller has the function of the transmission, which makes the feeding more briskly, with liftable feeding roller, you change and adjust the knife easily.

6.The back lower shaft table can be adjusted freely, so you can change the knives easily.

Category:
Model HY-M621 HY-M521
Working width mm 25-210 25-210
Working thickness mm 8-140 8-140
Working table length mm 1970 1970
Feeding speed m/min 6-36 6-36
Main spindle diameter mm Φ40 Φ40
Main spindle revolution r/min 6500 6500
Air pressure MPa 0.6 0.6
1st lower shaft power KW/HP 5.5/7.5 5.5/7.5
Right vertical spindle power KW/HP 5.5/7.5 5.5/7.5
Left vertical spindle power KW/HP 5.5/7.5 5.5/7.5
1st upper shaft power KW/HP 7.5/10 7.5/10
2st upper shaft power KW/HP 5.5/7.5
2st lower shaft power KW/HP 5.5/7.5 5.5/7.5
Feeding beam lifting power KW/HP 0.75/1 0.75/1
Feeding motor KW/HP 4/5.5 4/5.5
Total power KW/HP 41.55/54.05 34.25/46.51
1st lower shaft Cutter dia. mm Φ125 Φ125
right vertical spindle cutter dia. mm Φ125-Φ80 Φ125-Φ80
Left vertical spindle cutter dia. mm Φ125-Φ80 Φ125-Φ80
1st upper shaft cutter dia. mm Φ125-Φ80 Φ125-Φ80
2st upper shaft cutter dia. mm Φ125-Φ80
2st lower shaft cutter dia. mm Φ125-Φ200 Φ125-Φ200
Feeding wheel dia. mm Φ140 Φ140
Duct outlet dia. mm Φ140 Φ140

Related products