| Model | HY-M623E | HY-M523 | |
| Working width | mm | 25-230 | 25-230 |
| Working thickness | mm | 8-160 | 8-160 |
| Working table length | mm | 1970 | 1970 |
| Feeding speed | m/min | 6-36 | 6-36 |
| Main spindle diameter | mm | Φ40 | Φ40 |
| Main spindle revolution | r/min | 6500 | 6500 |
| Air pressure | MPa | 0.6 | 0.6 |
| 1st lower shaft power | KW/HP | 7.5/10 | 7.5/10 |
| Right vertical spindle power | KW/HP | 7.5/10 | 7.5/10 |
| Left vertical spindle power | KW/HP | 7.5/10 | 7.5/10 |
| 1st upper shaft power | KW/HP | 11/15 | 11/15 |
| 2st upper shaft power | KW/HP | 7.5/10 | |
| 2st lower shaft power | KW/HP | 7.5/10 | 7.5/10 |
| Top spindle lifting power | KW/HP | 0.37/0.5 | |
| Feeding beam lifting power | KW/HP | 0.75/1 | 0.55/0.75 |
| Feeding motor | KW/HP | 5.5/7.5 | 5.5/7.5 |
| Total power | KW/HP | 55.12/75 | 47.05/63.93 |
| 1st lower shaft Cutter dia. | mm | Φ125 | Φ125 |
| right vertical spindle cutter dia. | mm | Φ125-Φ80 | Φ125-Φ80 |
| Left vertical spindle cutter dia. | mm | Φ125-Φ80 | Φ125-Φ80 |
| 1st upper shaft cutter dia. | mm | Φ125-Φ80 | Φ125-Φ80 |
| 2st upper shaft cutter dia. | mm | Φ125-Φ80 | |
| 2st lower shaft cutter dia. | mm | Φ125-Φ200 | Φ125-Φ200 |
| Feeding wheel dia. | mm | Φ140 | Φ140 |
| Duct outlet dia. | mm | Φ140 | Φ140 |
Four side moulder
HY-M623E/M523 Heavy duty 4-side Moulder
1.Quick liftable short material device
2.This mechanism enables the smooth feeding for short woods. The auxiliary feeding roller has the function of transmission, which makes the feeding more briskly, with liftable feeding roller, you can change and adjust the knife easily.
3.Each cutter shaft if assembled and tested under air-conditioned environment and is supported by SKF bearing, The stable-worked shaft guarantees the surface roughness of finished products.
4.There is feeders switch and scram switch, easy to operate and adjust.
5.Feeding frequency inverter
6.Digital display, easy to operate, energy saving, protect the machine from wearing because of mechanical transmission.
